Home | Company info | Products | Partners | Contact us  
 
Ride On Scrubber Driers

CORAL 65 - 24 VOLT BATTERY OPERATED MACHINE

MODEL   CORAL 65
Cleaning width mm 660
Squeegee width mm 980
Working capacity, up to M2/h 3300
Brushes motor watt 700
Type of drive   automatic
Maximum gradient   10%
Suction motor watt 580
Suction vacuum mbar 160
Dimensions (LxHxW) mm 1575x1320x720
Weight (without battery) kg 260
Traction motor watt 500
Movement speed km/hr 5
Protection level   IP 23
Noise Level dB(A) 70
Battery autonomy Hours 3-4.5
Operating tension V/Ah 24 / 240
Solution Tank Ltr. 100
Recovery Tank Ltr. 105
Brush diameter mm 2x345
Brush pressure kg 60
Brush speed rpm 190

Special Features of Coral 65

Compact Ride on machine at 24V available with a washing unit with two counter rotating brushes and a working width of 650mm.

Constructed with tough
rotomold polyethylene tanks ensuring years of maximum performance and reliability.
Tank capacity of 100 litres detergent solution.

Battery Compartment
that permits to install batteries up to 240Ah for an autonomy up to 3300 sqm/h. For effortless operation, Coral 65 offers an automatic mode which will start all necessary operations of the scrubber once it is turned on.

Display shows all settings such as battery level, working hours and preset brushes pressure.

CORAL 65 - 24 VOLT BATTERY OPERATED MACHINE

CT110BT70   Technical Specifications
Version   BT 70
Electrical system Voltage 24 V
  Battery capacity 240 Ah ( 5h )
Scrubbing head Scrubbing width 700 mm
  Number of brushes 2 ( disk )
  Maximum pressure 45 kg
Productivity   4550 m²/h
Solution tank Capacity 110 litres
Recovery tank Capacity 115 litres
Vacuum Vacuum motor power 550 W
  Value in water columm 1700 mm(H20)
Squeegee Width 940 ( L ) mm
Traction Traction system front traction motor wheel + electronic card
  Maximum speed 6.5 km/h
  Motor power 600 W
Dimensions Length 1504 mm
  Width (without squeegee) 759 mm
  Height 1201 mm
Weight Without battery 214 Kg
  With battery 336 Kg  (240 Ah)
Safety systems   Auto power off system (operator not sitted on)

. Solution Control with Automatic Stop
Saves water and save chemicals. Solution flow stops and starts upon traction pedal command.

• Brush Control with automatic delayed stop
Saves brush wear and protects delicate surfaces. Brush rotation stops (4 sec delay) and starts upon traction pedal command.

• SLS (Self Levelling System) Constant brush Pressure control
Constant brush pressure with immediate spring reaction. Avoids also excessive brush and actuator wear. Variable pressure adjustment at all times whilst working.